E-SDS 392Ft HDMI Network Extender Over Single Cat5/Cat5e/Cat6/UTP/STP Ethernet Cable with IR Supports 1080P &3D, HD Audio, Deep Color – Support 20~60KHz Wide Frequency IR Remote Control

  • Sale Price: $139.99
  • Amount Saved: $37.10
  • Availability: Usually ships in 24 hours


  • Point to Point connection:Up to 120 meters transmission distance over single CAT6(High quality cable can reach 150 meters).No influence to the internet when it is connected to the same switch.
  • Router Connection:By using network router/repeater realize unlimited extension
  • One-to-many Connection:By using network router/switch.one sender to several receivers realize extender and splitter function.
  • HDMI source device(computer graphics card,DVD,PS3/4,HD monitoring equipment etc).HDMI display device like SDTV,HDTV,projector with HDMI port.
  • Network cables:UTP/STP Cat5e/6 network cables,which following the standard of IEEE-568B. Transmission length:CAT5 80m/CAT5E 100m/CAT6 120m

Product Description

HDbitT HDMI Extender deliver Full HD 1080P HDMI signal up to 150m, it supports extend and split by network devices, compatiable with existing network, and intellagent auto adjustment to match cable length, IR singnal transmission for control the source device.

1. HDMI: HDMI 1.3 Version, compliant with HDCP
2. Resolution: 480i@60HZ, 480P@60HZ, 576i@50HZ, 576P@60HZ, 720P@50/60HZ, 1080i@50/60HZ, 1080P/50/60HZ
3.100m hdmi extender over CAT5e cable:
- CAT5 cable: max. 100 meters
- CAT5e cable: max. 120 meters
- CAT6 cable: max. 150 meters
- This distance is also compliant for connection by switch/router for distribution.
4. Cable runs can be extended another 120m by adding a Gigabit Ethernet switch
5. Maximum 3 layers of Ethernet switches could be passed through
6. Uses off-the-shelf gigabit IP switches for extension and distribution; and the switch/router can be used to log onto the internet at the same time
7. Follow up standard IEEE-568B protocol
8. IR signal: Supports 20-60KHz IR devices
9. Working temperature: 0-60 degree centigrade
10. Power consumption: TX:3.5W; RX:3W
11. Power Supply: DC 5V1A
12. Dimensions (L x W x H): 96.8x 94 x 23.7(mm)

1. This extender requires sender and receiver to work at the same time.The link for receive:http://www.amazon.com/dp/B0122Z68YM
2. Do not mix up the HDMI to LAN sender and LAN to HDMI receiver, and the IR blaster and IR receiver.
3. Do not plug-in/out the cables ,when it is in using.
4. Use DC5V power supply only. Make sure specification matched if using adapters not supplied by factory.

Package Contents:
1 X HDbitT HDMI Extender Sender
1 X HDbitT HDMI Extender Receiver
1 X IR blaster extension cable
1 X IR Receiver extension cable
2 X 5V DC Power Supply adapter
1 X User Manual

Product Detail

Customers Who Viewed This Item Also Viewed